CHILLER SLIDING DOOR WITH MEAT TRACK PASSAGE 90mm WING THICK
Chiller sliding door 90 mm. wing thick.
injected by expanded polyurethane CFC free 38/40 Kg/cu m density.
Perimetral tubular gasket.
Stainless steel version is also available. Frontal assembly system by screws .
Opening sealed in white rubber for meat track passage .
Aluminum rails , lower guide profile apply on panel , heavy duty stainless steel support for pulleys with opening for meat track passage and internal/external lever handles. Upon request lock with key available.
Sliding door for normal temperature with a drive-way passage, with 90 mm thick wing,
insulated with injected expanded polyurethane of 38/40 kg/cu m density and provided with a gooseneck in INOX steel for coupling to the top bearing rail in order to allow the maneuver even when the drive-way rail is fixed.
The frame of the “880PG” door has, on top, the tyre opening that allows the fixed drive-way passage, there isn’t COP counter-frame .
Thermic bridge interruptions are made with sections in PVC located under the wing seal and on the frame side, towards the inside of the unit.
The wing is supported by a top bearing rail and guided by a rear wall rail in anodized aluminum.
The door is delivered in 3 single components only (wing, frame, rail) to make door mounting in site easier and faster