HPT/HP
Hinged door equiped with heating cable with 120 mm thickness, suitable for low temperature rooms (-18/-40 °C). This door has been insulated with injected expanded polyurethane of 40/38 kg/m3 density. The standard coating eather all stainless steel or in galvanized white sheet and equiped with the electric heating cable that is located eather on the frame under the gasket or in the door and it is easy to change in case of fault. Door has double perimetral tublar gasket in EPDM.
GP-200
GP200- PE impact traffic door with stainless steel hinge combines quality with high cost-effectiveness. The hinges are maintenance-free and are also suitable for heavy-duty continious use. The narrow design of the hinges leaves the greatest possible width of passage and so allow more freedome of movement.
SD-200
Single swing door, is used for seperation of production premises having the same temperature. Semi insulating door on hinges with two wings, 40 mm thick wing insulated with injected polyurethane of 38/40 kg/m3 density.
GP-360
GP-360 PE impact traffic door with stainless steel hinge, combines quality with high cost-effectiveness. The hinges are maintenance-free and are also suitable for heavy-duty continuous use. The narrow design of the hinges leaves the greatest possible width of passage and so allows more freedom of movement.
DSD-360
Double swing door is used for separation of production premises having the same temperature. Semi insulating door on hinges with two wings, 40 mm thick wing insulated with injected polyurethane of 38/40 kg/m3 density.
SM/SP
Sliding door with 90 mm thick wing, suitable for standard temperature rooms (-20 / +4 °C). Sliding door with 120 mm thick wing, suitable for low temperature rooms (-18 / -40 °C). Sliding doors with 90 and 120 mm thick wing, insulated with injected expanded polyurethane of 38 / 40 kg/m3 density. The standard coating either all stainless steel or in galvanized white sheet. For low temperature room, electric heating cable is located either in the frame, under the gasket or in the frame and its easy to change in case of fault. SP model has double perimetral tublar gasket in EPDM.
SMA/SPA
Sliding door with 90 mm thick wing, suitable for standard temperature rooms (-20 / +4 °C). Sliding door with 120 mm thick wing, suitable for low temperature rooms (-18 / -40 °C). Sliding doors with 90 and 120 mm thick wing, insulated with injected expanded polyurethane of 38 / 40 kg/m3 density. The standard coating either all stainless steel or in galvanized white sheet. For low temperature room, electric heating cable is located either in the frame, under the gasket or in the frame and its easy to change in case of fault. SP model has double perimetral tublar gasket in EPDM.
ATC
The controlled atmosphere door is a new product that would complement. The already extensive vang of doors for cold room. This kind of doors include a wing with aluminium edges and special EPDM perimetral gasked at high seal to prevent the change of oxygen between the cell and the external enviroment. To ensure perfect sealing of the leaf were applied foam lateral levels which prees the seal against fram.
PVC Curtain
Standard PVC strip, planner or ribbed surface / colorless or colored which application temperature range is from 20- to 50+ centigrade degree. Polar PVC strip, planner or ribbed surface / colorless or colored which application temperature range is from 50- to 50+ centigrade degree.
